SMOK Mag Kit Giveaway, From Feb 15 To Feb 25

Dear Customer,

Happy Chinese New Year, folks!
We know everyone enjoys getting free stuff, especially stuff like SMOK‘s awesome Mag Kit. Now you have a chance to get it for free!
We are giving away 1x SMOK Mag Kit to one lucky winner.  The giveaway starts on Feb 15 and ends on Feb. 25th, so don’t miss your chance!
Join Now

SMOK Mag Kit Giveaway

Any question, please feel free to contact marketing@healthcabin.net.

Best regards,

Healthcabin Marketing


Spring Festival Sale & Shipping Schedule


GeekVape GBox Squonk Kit Rewivew

Thanks out to @HealthCabin for very kindly sending this unit to me for review. But as usual, if something’s not up to snuff, you’ll know about it.

I have never squonked, so maybe it’s fitting that I did this review from a first time squonker’s perspective. Being very picky on flavor, I always review from that perspective first, because if it doesn’t taste good, what’s the point. Have never had great luck with RDA’s in general, so I was anxious to see what this unit would reveal.

GBox Specs:

  • 5 to 200W Output
  • GeekVape AS Chip
  • Seven Total Output Modes
  • Ni200 Nickel Support
  • Titanium Support
  • SS316 Support
  • Kanthal Support
  • POWER Support
  • VPC Support
  • Bypass Mode
  • 0.05 to 3.0 ohm Atomizer Resistance Range
  • 0.1 to 8 Voltage Range
  • 0.96″ OLED Display
  • Dual 18650 Battery (sold separately)
  • Amp Range
  • Output Power
  • Atomizer Resistance
  • Battery Life Indicator
  • Puff Counter
  • 8ml Squonk Bottle Juice Capacity
  • Micro USB Port
  • Charges up to 2A
  • Spring Loaded Gold Plated 510 Connection
  • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating

Radar RDA Specs:

  • 24mm Diameter
  • Additional Cooling Wide Bore Top Cap
  • Dual Airslots per Side
  • 3mm by 1mm per Airslot
  • Staggered Directional Post Build Deck
  • Two Terminal Per Post
  • 3mm Diameter Terminals
  • Top Mounted Allan Screws
  • 5mm Deep Juice Well
  • Double O-Ring Secured
  • PEEK Insulator
  • Dual Side Airslots
  • 9.5mm by 2mm Each
  • Fully Closeable
  • 10mm Wide Bore 810 Delrin Drip Tip
  • 10mm Bore Delrin 510 Delrin Drip Tip

With dual 18650’s and a juice bottle I was prepared for this to be big, but surprisingly not that big at all, and it fit very nicely in the hand.

Battery venting is achieved through the name, very interesting.

I chose to run it full open on the large slots, but you can easily adjust the flow from wide open to completely shut.

The large OLED 0.96″ display is very good, shows everything you need, but it somewhat dim at the factory setting (easy to change). When maxed out at 100% however it looks very good, but is hard to read in direct sunlight.

The spring loaded 510 pin worked flawlessly and there was no leaking when squonking.

The bottom loading compartment was snug and secure with no rattles, and the slide release proved to be reliable and secure with no accidental unlatching.

The packaging was great and included all the normal documentation, cards, and instructions. The extras included were well thought out including 2 drip tips, a 510 adapter, grub screws, o-rings, screw tool, extra squonk bottle, and a multi tip charging cable.

Now onto the included Radar Bottom Feeding RDA. As I said, never had really good luck with RDA’s. They always seemed to lack flavor compared to my SC’s and/or were hot and spitty, so I had a fire extinguisher handy, JUST in case. The Radar was well matched to the GBox and had nice airflow slots.

Air flow is easily adjustable from wide open (my preferred setting) to completely closed by rotating the inner cup and the outer sleeve.

For all of my testing I used some simple kanthal, 5 wrap alien claptons with a 3mm I.D.

With the huge build deck, and large wire holes (no shared leads) loading the coils couldn’t be easier.

Tried multiple coil heights and the best flavor (as expected) came from aligning the airflow directly in front of the coils, and having the air flow entering at about even with the coil, and/or somewhat below. You can raise the coils, but no higher than the top of the coil mounts.

With the large deck, wicking couldn’t be easier with plenty of room. Because the top of the squonk pin is elevated some of the juice remains in the deck and doesn’t drain completely out.

Fluff, stuff, and start squonking.

Loaded and ready to squonk.

Testing – Flavor/Usage/Performance:
Coming from a non-squonker, and non-RDA’r, this setup was SHOCKINGLY good. How good was it ?? It was SO good, that I actually had to try three different types of juice, JUST to make sure. Creamy, fruity, and pie flavors were ALL off the charts good. Wasn’t expecting it to deliver the taste that it did. The squonking was simple, flavwless, and without issue. I purposely tried to OVER squonk a few times, and nope, no leaking. I’m sure it could be possible to over do it, but you would really have to work at it. With the lower lip on the RDA, and the deep deck, it’s very forgiving to say the least. With all of the available modes on the GBox there’s something there for everyone. I did all testing in simple power/wattage mode and it was flawless. The controls are easy to use, speedy adjustments, which can be locked, switching modes, adjusting brightness easy as well. One seemingly unimportant detail is how FAST the unit turns on. 5 clicks, quick splash screen, right to the vaping.


One interesting thing (I did not receive this or test) that is an option is GeekVapes Flask refilling system.
A larger bottle in a sleeve that you can quickly re-fill the bottle without removing. Very neat idea.


Needless to say I was very impressed by this kit. Had no issues during the testing, and the flavor was actually ON PAR with my beloved SC setups. Mod was well constructed, easy to use, clear display (albeit dim in outdoor/sunny conditions), easy to adjust. The RDA had great flavor, was easy to build on and wick, and didn’t leak. If you’re new to squonking, or even a regular squonker, the GeekVape GBox won’t dissapoint. This places the GBox squarely in at a 9.5/10.


  • Outstanding flavor
  • Easy to build on / wick
  • Big display
  • Intuitive controls
  • Numerous operating modes
  • Deep build deck with elevated squonk pin
  • Great air flow


  • Default brightness somewhat dim, hard to see in sunlight
  • Bigger than an EGO

Thanks again out to @HealthCabin for sending this unit out for review. As I was writing this review they messaged me and said they had added a 38% discount coupon code, so run don’t walk to get yours !!!

Discount Coupon Code: gbox381

EDIT 2-4-18 From @HealthCabin …

2018 Chinese Spring Festival Sales
Whole Order 10% OFF (except Clearance)
Coupon Code: CNY2018
Date: Feb. 10 – 25 (-0600GMT)


VBRVAPE Boring Tank Giveaway

Dear Customer,

We are giving away 3 sets of VBRVAPE Boring Tank and will announce the winners on Feb 10.

VBRVAPE Boring Tank adopts the innovative DTC4 dual tasking coil, which is switchable between single coil and dual coil. The DTC4 is 0.34ohm in single coil mode and 0.17 ohm in dual coil mode. With 4ml large capacity, the Boring is capable of storing more e-juice as you wish. The convenient top slide refill design makes the filling more easier too. The adjustable bottom airflow brings the optimal flavor with massive cloud. Just get this magical device to enjoy an amazing vape!

Please note that all personal info in this contest must be authentic.

VBRVAPE Boring Tank Giveaway

Any question, please feel free to contact marketing@healthcabin.net.

Best regards,

Healthcabin Marketing

Aimidi Curve V8 Mod Giveaway


Cuttwood Manic Mint E-Liquid Review

Manic Mint E-liquid is a newly released mint flavored e-juice from Cuttwood.  You can now set aside candy canes this Holiday season. It is because Cuttwood’s latest Manic Mint e-liquid will give you exactly the same taste as a sweet candy cane with menthol flavor. Menthol lovers that love calming peppermint flavor with a gently sweet candy tinge will surely be excited with this Manic Mint flavor. You can really never imagine the bursting flavor can come in just a small-sized bottle.

Flavor Description

A delightful and carefully made blend of cooling peppermint leaves with just the appropriate amount of sweetness , giving you the primary flavor of natural sweetness and fresh peppermint. It’s the pefect blend of freshly-picked and natural peppermint leaves. Peppermint is a combination of spearmint and water mint. These two give you a cool and refreshing taste.This juice has a hint of natural sweetness to round off the mouthwatering flavor for a flawless vape finish. Manic Mint of Cuttwood surely gives you a long-lasting spirit of its flavor.

Nicotine Strength

Manic Mint e-liquid by Cuttwood is available in 3 different nicotine strength level. If you want to vape without any nicotine content, you can get this e-liquid in 0mg nicotine strength. If you prefer to have the strongest level of nicotine available in this juice, then 6mg is for you. It also has 3mg nicotine level for a lower strength of nicotine content.


The density of Cuttwood Manic Mint e-liquid is just perfect. It has 70% VG and 30% PG. A ratio that will give you the perfect vaping experience.

Throat Hit

From the moment you will inhale it, you will see that Manic Mint is one of the most enjoyable e-juices you will ever taste. The spearmint comes through to carry a refreshing kick every time. And you can’t stop the sweet mellowing peppermint that builds up throughout the exhale. It is so mild in your throat and it gives you a refreshing mint flavor in your mouth. It does not hit so strongly that it will hurt your throat at all. You will absolutely experience a relaxing feeling with Manic Mint e-liquid by Cuttwood.

Vapor Production

Aside from the cool taste of its peppermint, Manic Mint by Cuttwood also gives you the vapor product
ion you want. This e-liquid blows considerably massive and dense clouds. I recommend you use a high wattage mod for this. I had a wonderful experience using my Smok Alien 220W mod kit. If you are worried about the taste, this e-juice is able to sustain its delicious and cool flavor even if you increase the wattage.


Manic Mint e-liquid by Cuttwood comes in a 60ml bottle. It has a child-resistant cap. Its label contains the brand name, the specific flavor, net contents and some other details.  This handy bottle has the advantage of being easy to carry around since it is so cute and can just fit in your pocket. This 60ml bottle is ideal for vapers who are constantly on the move.


Cuttwood is the manufacture of Manic Mint e-liquid. It is one of the most famous, well-respected and best-reviewed e-juices these days. Their startling collection of products is definitely incomparable with respect to the taste, quality, and excellence. It is all entirely derived from the United States of America. The Manic Mint flavor is one of the latest additions to their juice collections. One that has already been intensely welcomed by the vaping community all over the world.

So for all the menthol lovers, you’ve got to try this Manic Mint by Cuttwood to see for yourself and experience the real fun you will benefit from vaping. It is guaranteed recommendable to all of your friends who love having an adventure in vaping



Resource: https://vapecredible.com/blog/cuttwood-manic-mint-e-liquid-review/

1 2 3 83