Joyetech, EKEE, 80W Mod Kit, Procore Motor Tank, Atomizer

Joyetech has released a new stuff named EKEE kit with Procore motor tank and today we got a sample and here I would like to share with all of you guys about my thoughts after testing.

The package is a gift box with a very simple cover design showing the EKEE image and the back of the box shows packing details with including

1*EKEE mod, 1*Procore motor atomizer,

1*ProC1(0.4ohm) head, 1*ProC1-S(0.25ohm) head,

1*Extended Vent pipe,

1*standard glass tube(4.5ml),

1*QC USD cable,

2*manual,

1*warranty card,

1*warning card and spare parts as well as attaching serial number & security code.

Took apart the box, we got the EKEE KIT in red and it looks like a car key at the first sight.

First of all, let’s look at the atomizer first, the Procore motor tank, which consists of drip tip, top cap, glass tube, coil & base.

It is pre-built with a 2ml glass tube but there is also a 4.5ml glass tube for alternative, so if you do not like the short & fat shape of the 2ml version, you could change the glass tube to the 4.5ml one.

Top filling design just as what most atomizers do, but no need to thread the top cap, just need to push horizontally per the indicating direction.

The adjustable airflow is set on the bottom.

Now let’s see the mod, unlike other regular designed mods in rectangle shape, the EKEE mod is designed in the shape of a car key, which makes it fashionable.

With the 2000mah built-in battery, it can be charged via USB cable by attaching it with the port on the side.

The exquisite spring loaded 510 connector is applicable for tanks with 510 length ranged from 4.0mm to 5.5mm as well as up to 25mm diameter.

Now let’s turn it on and see what function does it have.

Click the fire button 5 times in quick succession to turn it on or off, and you will find there are Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode for options.

Press the fire button 3 times to enter into the mod options, and then click ‘+’/ ‘-’ buttons to switch the mode you prefer and press the fire button to confirm.

As for the After Tem/TCR mode switched, when it is still blinking, click ‘-’ button first then ‘+’ button to switch between Ni/Ti/SS or M1/M2/M3.

Power mode

Data showed on the screen:

  1. Wattage(range from 1-80W)
  2. Voltage
  3. Resistance
  4. Puff

Bypass mode

Data showed on the screen:

  1. Wattage(range from 1-80W)
  2. Voltage
  3. Resistance
  4. Puff

TC mode

Data showed on the screen:

  1. Wattage(range from 1-80W)
  2. Temperature
  3. Wire material(Ni/Ti/SS)
  4. Resistance
  5. Puff

 

TCR mode

Data showed on the screen:

  1. Wattage(range from 1-80W)
  2. Temperature
  3. TCR mode(M1/M2/M3)
  4. Resistance
  5. Puff

 

Real-time-clock mode

Data showed on the screen:

  1. Wattage(range from 1-80W)
  2. Resistance
  3. Puff
  4. Real time

Note: The real-time-clock function is displayed in two ways: digital clock and analog clock.

Press the fire button 3 times and switch the modes by pressing ‘+’ button and then select the clock mode.

Press the fire button 3 times and click ‘-’ button once, it will blink and then click ‘+’ button once to switch between digital clock or analog clock.

Testing result:

  1. Creative design for the shape but it is not very attractive.
  2. Suitable size to hold.
  3. The best working wattage is below 50W and there will be a burning smell with more than 60W.
  4. Vaping experience.

With 0.2ohm ProC1-S coil & 50W power mode, the EKEE kit delivers a good taste of the ejuice as well as nice vaping cloud, but when the wattage is adjusted to more than 60W, there will be burning smell.